Carl Ward Carl Ward's Profile Page

Carl Ward Carl Ward

0 Course Enrolled • 0 Course Completed

Biography

Network Appliance NS0-093必殺問題集、NS0-093関連合格問題

なにごとによらず初手は难しいです、どのようにNetwork Appliance NS0-093試験への復習を始めて悩んでいますか。我々のNetwork Appliance NS0-093問題集を購買するのはあなたの試験に準備する第一歩です。我々の提供するNetwork Appliance NS0-093問題集はあなたの需要に満足できるだけでなく、試験に合格する必要があることです。あなたはまだ躊躇しているなら、TopexamのNS0-093問題集デモを参考しましょ。

Network Appliance NS0-093試験、またはNetApp認定ハードウェアサポートエンジニア試験は、NetAppストレージシステムを扱うハードウェアエンジニアの知識とスキルをテストするために設計されています。この認証は、NetAppハードウェア展開のサポートにおける専門知識を証明する必要があるITプロフェッショナルにとって貴重な資産です。NetAppは、候補者がNetAppストレージシステムで少なくとも6ヶ月の経験を持ち、ハードウェアの問題を特定して解決できる能力を持っていることを推奨しています。試験は60の複数選択問題から成り、制限時間は1時間30分です。

>> Network Appliance NS0-093必殺問題集 <<

NS0-093関連合格問題、NS0-093試験解答

TopexamのNetwork ApplianceのNS0-093試験トレーニング資料は豊富な経験を持っているIT専門家が研究したもので、問題と解答が緊密に結んでいるものです。それと比べるものがありません。専門的な団体と正確性の高いNetwork ApplianceのNS0-093問題集があるこそ、Topexamのサイトは世界的でNS0-093試験トレーニングによっての試験合格率が一番高いです。Topexamを選んび、成功を選びます。

ネットワークアプライアンスNS0-093認定試験では、NetAppハードウェアアーキテクチャ、インストールと構成、ストレージとデータ管理、トラブルシューティングなど、幅広いトピックをカバーしています。候補者は、FASやAFFシステムなど、NFS、CIFS、ISCSIなどのさまざまなストレージプロトコルなど、さまざまなNetAppハードウェアプラットフォームに精通している必要があります。さらに、この試験では、NetApp ONTAP、NetApp SnapCenter、NetApp SolidFireなどの最新のNetAppテクノロジーをカバーしています。

Network Appliance NetApp Accredited Hardware Support Engineer 認定 NS0-093 試験問題 (Q43-Q48):

質問 # 43
Which two tools can be used to recover an inconsistent aggregate? (Choose two.)

A. wafl_check
B. wafliron
C. wafl snapiron
D. file check

正解：A、B

解説：
To recover an inconsistent aggregate, the following tools can be used:
* What it does:This tool is used to perform a consistency check on WAFL metadata. It identifies and attempts to fix WAFL inconsistencies in aggregates.
* When to use:Run wafl_check after identifying WAFL inconsistencies to repair minor metadata issues.
1. wafl_check
* What it does:This tool repairs WAFL inconsistencies by reconstructing metadata. It is more powerful than wafl_check and should only be run under NetApp Support guidance, as improper use can result in data loss.
* When to use:Use wafliron for severe WAFL inconsistencies that cannot be resolved by wafl_check.
2. wafliron
* A. file check:
* This is not a valid NetApp tool.
* C. wafl snapiron:
* While similar in name, snapiron is used for snapshot recovery, not aggregate recovery.
Why Other Options Are Incorrect:
* "ONTAP Aggregate Troubleshooting Guide" details the usage of wafl_check and wafliron.
* NetApp Support documentation provides guidelines for recovering inconsistent aggregates.
References:

質問 # 44
On a NetApp FAS9000 system, which two field replaceable units (FRUs) are supported for replacement without takeover? (Choose two.)

A. I/O module
B. NVRAM module
C. DCPM module
D. caching module

正解：A、B

解説：
FRUs on FAS9000 Supporting Replacement Without Takeover:
* A (I/O Module): I/O modules can be replaced hot (without takeover) to maintain system uptime during hardware servicing.
* D (NVRAM Module): NVRAM modules on FAS9000 can also be replaced without a node takeover, ensuring data integrity during replacement.
Why Other Options Are Incorrect:
* B (DCPM Module): The DCPM (Data Center Power Management) module is not hot-swappable and requires a node takeover.
* C (Caching Module): The caching module is integrated and typically requires a node takeover or power-down for replacement.
NetApp Reference Documentation:
* Refer to the "NetApp FAS9000 Hardware Service Guide" for supported FRU replacement procedures and operational constraints.

質問 # 45
A node has failed.
Which two conditions must be met for an automatic takeover to be triggered? (Choose two.)

A. Mailbox disks must be reachable.
B. The cluster network must be available.
C. NVRAM must be synchronized.
D. The combined utilization of both nodes must be less than 100%.

正解：A、C

解説：
For an automatic takeover to occur in an HA pair, the following conditions must be met:
* The HA pair uses mailbox disks to coordinate and ensure that both nodes have consistent cluster state information.
* If the mailbox disks are not reachable, the takeover process cannot proceed.
1. Mailbox Disks Must Be Reachable:
* The nodes in an HA pair continuously mirror NVRAM data to ensure that writes are protected.
* If NVRAM is not synchronized, the takeover cannot safely handle active workloads.
2. NVRAM Must Be Synchronized:
* A. The combined utilization of both nodes must be less than 100%:
* This is not a requirement for automatic takeover. ONTAP can handle higher utilization during failover scenarios.
* B. The cluster network must be available:
* While the cluster network is critical for normal operation, takeover can still occur if the cluster network is unavailable, as long as the HA interconnect is operational.
Why Other Options Are Incorrect:
* NetApp "ONTAP High Availability Guide" outlines the requirements for automatic takeover in HA pairs.
* "ONTAP NVRAM Synchronization and Failover Guide" explains NVRAM mirroring requirements.
References:

質問 # 46
In preparation for an upgrade to ONTAP 9.6P8 software, you have uploaded the ONTAP image
96P8_q_nodar_image.tgz onto your local web server with address 192.168.10.10.
Which is correct command syntax to download this image to the cluster image repository?

A. ClusterA::> storage firmware download -node local -package-url
http://192.168.10.10/96P8_q_nodar_image.tgz
B. SP ClusterA-01> cluster image package get -url
http://192.168.10.10/96P8_q_nodar_image.tgz
C. ClusterA::> cluster image package get -url
http://netapp.com/ontap9/downloads/96P8_q_nodar_image.tgz
D. ClusterA::> cluster image package get -url
http://192.168.10.10/96P8_q_nodar_image.tgz

正解：D

解説：
Command Syntax for Downloading ONTAP Image:
* The cluster image package get command is used to download the ONTAP image from a specified URL to the cluster's image repository.
* The syntax requires the -url parameter followed by the full URL of the image file.
Why Option C Is Correct:
* This command syntax directly downloads the image from the local web server at http://192.168.10.10/ to the ONTAP cluster repository.
* Other options either refer to incorrect commands or unsupported URLs.
NetApp Reference Documentation:
* The "ONTAP Software Upgrade Guide" provides the exact command and steps for downloading ONTAP images via HTTP or FTP.

質問 # 47
An aggregate has experienced a multiple disk failure due to a failing I/O module (IOM). The module has been replaced and the aggregate is still failed.
What step can be taken to recover the aggregate?

A. Unfail the drives in the order that they failed from the clustershell
B. Unfail the drives from maintenance mode.
C. Use diskcopy from maintenance mode.
D. Run wafliron from the boot_menu.

正解：B

解説：
When an aggregate fails due to multiple disk failures caused by a faulty I/O module (IOM), the first step after replacing the faulty IOM is to manually unfail the affected drives. This process is done in maintenance mode.
* Enter Maintenance Mode:
* Reboot the node and interrupt the boot process to access maintenance mode.
* Identify Failed Drives:
* Use the command:
Steps to Recover the Aggregate:sql
Copy code
storage show disk -broken
This command lists all failed (broken) drives.
* Unfail the Drives:
* Use the following command for each failed drive:
php
Copy code
disk unfail <disk-name>
* Reconstruct the Aggregate:
* Once all drives are unfail, the system should begin reconstructing the RAID groups in the aggregate.
* A. Use diskcopy from maintenance mode:
* Diskcopy is used for cloning or copying data between disks, not for recovering failed aggregates.
* B. Run wafliron from the boot_menu:
* wafliron is used to repair WAFL inconsistencies, but it does not help recover failed aggregates due to disk issues.
* D. Unfail the drives in the order that they failed from the clustershell:
* Drives must be unfail in maintenance mode, not from the clustershell.
Why Other Options Are Incorrect:
* NetApp's "Aggregate and RAID Troubleshooting Guide" explains the process of recovering aggregates and using maintenance mode commands.
* "ONTAP Disk Recovery Guide" outlines steps to unfail disks and recover RAID groups.
References:

質問 # 48
......

NS0-093関連合格問題: https://www.topexam.jp/NS0-093_shiken.html